Photo Courtesy of Jeske MX Customs // Brendan Lutes
Our buddy Tony Jeske has built some of the most insanely detailed builds over the years, and recently informed us that he may be selling his dearly beloved custom YZ125 “Hell Raiser” that was all over your Instagram and Facebook feeds last year. When it comes to two-strokes, this one is a pretty shining example of badass. All of the details and link to the eBay auction below, and scroll down for some videos!
All Details Needed are Below, courtesy of Jeske MX Customs:
This is a 2016 YZ 125. Built by Tony Jeske of Jeske MX Customs, the MX Industry Leaders in Custom Built, high performance off-road machinery. Creators of – Dirt Bikes on Another Level.
It’s name is Hell Raiser.
There is nothing ordinary about this bike. The only one in existence, a true piece of American Motocross history, and a MOTORCYCLE that will always be remembered. You won’t find another MX bike remotely close to what this bike is.
The intention with Hell Raiser was just as its name states. Raise Hell. And we did just that. It’s much more then a bike. It’s a statement. A promise.
It cemented an already strong reputation for Jeske MX Customs and the bikes built and created. We build high end quality show bikes, then race/ride the Hell out of them. We’ll put some of the baddest riders in the sport on them just to prove a Jeske bike is more then worthy.
So, if you don’t get the winning bid on the Hell Raiser, just know, we’d be happy to build you one. Maybe it’s not your style… That’s ok too. We’re great at building dirt bikes so don’t sweat the details. That’s where we shine.
The History of Hell Raiser
-Bike received 12/28/16, finished build 2/13/16. Built in Hayden, Idaho.
-Showcased at The 1 Moto show February 14/15/16 2016, one of the nations best custom bike shows, where builders are invited to show. We worked with Fasthouse to showcase the story of the bike and bike show.
-Displayed at Washougal MX Pro Motocross national July 2016
-Ridden by two Professional riders, one to aid in break in, and the other, Darryn Durham, to race at Washougal MX in Washington in September 2016 at the unique 125 Dream Race, where he placed third.
-Darryn also stirred up some hell in Portland on the machine. We worked with Fasthouse to complete the story. —-**Editors note: Go to bottom of page for videos.
-Displayed at the Seattle SX with VP Racing Fuels April 2017
-Spoken of worldwide. Stories published by multiple websites. Gone viral and global on social media. It’s been a source of inspiration for many.
*See below for some links*
The Bike details and specs.
2016 Yamaha YZ125
VIN # – JYACE16C5GA028754
Engine # – E120E-0029036
7 hours on Engine and chassis. Ridden on a track 3 times.
*Modified 125cc power plant. Built by JMXC.
-Bill’s Pipes Engine and Carb mods – *needs race fuel with current head – minimum 105 octane (Vp Racing Fuels C12 or MRXO2 was used)
-Balanced and welded crankshaft
-Pro X piston
-Bill’s Pipes cone look pipe/MX2 silencer (Carbon in photos was proto)
-VForce V3 reed block
-Hinson complete clutch – basket/hub/pressure plate/pack/springs/cover
-DT1 Air Filter
-Moto Stuff aluminum fasteners, raw finish, all external bolt/nut points
-Specialty external coatings
-Evans Waterless coolant used
*Piston ring replaced at 4 hrs run time.
– Valved and sprung for 160# Pro
*Titanium shock spring
*X-Trig shock pre-load adjuster
*DLC Coated fork tubes
*Color coordinated anodizing
*X-Trig ROCS triple clamps – stock offset set.
Wheels and tires
-Rad Mfg wheel set. DID Dirt Star rims, Bronze machined hubs with Jeske logo engraved, black HD spokes and black nipples.
-Pro Taper 49 t sprocket and Moto Stuff rotors mounted. (Rotors mounted with Titanium hardware)
-Moto Stuff BLADE systems front and rear. Core stainless brake lines held together with Aluminum banjos.
Front 280mm oversized rotor
Rear standard size rotor.
-JMXC Works Edition calipers (stock components dressed up)
-Trick Engineering rear brake pedal pivot stuffer (rock jam protection)
-Works Connection black Elite clutch perch
-Works Connection black Front brake lever
-Pro Taper aluminum throttle tube
-Pro Taper Reed/Henry bend Fuzion Handlebars
-Pro Taper medium 1/2 waffle grips
-Cycra Black power flow plastic.
-Clarke Mfg. Black fuel tank.
-Hyde racing skid plate.
Graphics and Seat
-Custom Throttle Jockey gloss graphics. Originally had matte finish. Those plastics swapped out after race.
-SDG single stage black gripper seat cover.
-Pro Peg titanium foot pegs
-Moto Stuff aluminum body hardware
-Frame, swingarm, and subframe coatings
-Hammerhead foot controls. Rubber tipped standard length shifter and Titanium brake pedal tip.
-Works Connection Launch Control as well as many other WC parts
-Designed, Built and maintained by a professional.
*wood stand & Carbon silencer not included with bike*
*Have MFG. Certificate of Origin*
*Please visit our site for some info about us. Note that we are no longer in Idaho.
“The 1 Motorcycle Show” by Fasthouse
Darryn Durham GoPro Onboard by Fasthouse
“Durham Poaches Portland” by The Viewing